5
4.1 Open the Network, click “Properties”
button of the TCP/IPv4 protocol.
4.4 Add the IP address 2.X.X.X or 10.X.X.X
(X could be arbitrary value).
4.5 Interface of adding successful,
click “
OK
” and exit.
4.2 Click “ Advanced”.
4.3 Click “ Add”.
Connect ArtNet-DMX-8S to the Computer
2. Use the equipped adapter to power ArtNet-DMX-8S.
3. Connect ArtNet-DMX-8S and computer via the cable.
1. Install the Madrix 3 software in the computer, the icon on the desktop :
MADRIX 3
4.
IP Setting: This control system is compatible with random network segment. According to the ArtNet
protocol, 2.X.X.X or 10.X.X.X can be added in the computer ( X means arbitrary value),
methods as below:
This product is compatible with all the ArtNet software in the market. Here take MADRIX as an example:
www.ltech-led.com
7. Click
the tab of "DMX devices", set port status to “ON” if connected successfully. Now, you can use
computer to control lamps via ArtNet-DMX-8S.
6
*
MADRIX is a registered trademark of Inoage GMbH Co., Inc. in Germany.
5. Open Madrix 3 software, choose“preferences”
>
" device manager" from menu.
6. In "device manager" dialog, choose "ArtNet" tab, tick “enable” and click search
,
Artnet-DMX-8S
will be searched.
www.ltech-led.com
