BLUETOOTH OPERATION
Note: Prior to use Bluetooth function, your micro system should be paired firstly with your Bluetooth device.
(“Pairing” means establish connection between Bluetooth devices such as MOBILE PHONE, TABLETS, PC, ETC.)
1.
Press the “
SOURCE
” button to switch into the
BLUETOOTH MODE
, “
BT
” displays on the VFD.
2.
In Bluetooth mode, the blue status indicator flashes three times, then 2 beep sounds, the status indicator goes
RED & flashes, The micro system enters automatically searches for Bluetooth device.
3.
Turn on Bluetooth functionality on your device and make it discoverable (see your device’s instructions to add or
setup a Bluetooth device).
4.
Search for Bluetooth equipment
“ CDM100 ”
is your micro system identification. Red status indicator switches to
blue lighting which means that devices are successfully paired. (During the paring, if the Bluetooth Version is
below 3.0, you need to input code “0000”) Your Bluetooth device stores the micro system unique identification at
the same time.
NOTE: The effective range of Bluetooth devices is 10 meters.
Once paired, your device should connect to the
CDM100
whenever within the Bluetooth range (10 meters).
NFC Function
Using NFC (Near Field Communication), you can transfer your music from your phone to your Bluetooth device
including NFC feature. The maximum reading distance is about 1 cm, which prevents unauthorized communications.
Connection procedure
1.
Please press SOURCE button on remote to switch into Bluetooth mode
2.
Before connecting, make sure your connecting devices (e.g. phone or Tablet) with NFC technology.
3.
Set your connecting devices (e.g. phone or Tablet) into Bluetooth working mode.
4.
Set your connecting devices (e.g. phone or Tablet) into NFC working mode. For all the devices with NFC, you will find
NFC setting on your device, confirm setting “Allow data exchange when it touches another device”. Please refer to
below photo from the cell phone.
SPECIFICATIONS
Power supply ................................................................................. AC 110 - 240 V, 50/60 Hz
Power consumption ..................................................................................................... 30 W
Standby mode consumption ..................................................................................... < 0.5 W
Radio Section
Frequency ranges ............................................................................... FM 87.5 ~ 108.5 MHz
CD PLAYER ............................................................................ CD / CD-R-RW / MP3 FORMAT
USB SECTION ................................................................................. USB compatible Port 2.0
AUXILIARY .................................................................................................................. 3.5mm
Amplifier
Output power ........................................................................................ 2X20W (MAX 40W)
BASS ................................................................................................................ -10dB~+10dB
TREBLE ............................................................................................................. -10dB~+10dB
Frequency response ............................................................................. 20Hz – 20kHz +/-3dB
S/N .............................................................................................................................. >80dB
