TO 2 CHANNEL
AUDIO DEVICE
TO LINE IN JACK
TO OPTICAL JACK
INSTALLATION
3.
Plug the AC power adapter into the DC jack located on the rear
of the transmitter.
1.
Remove the Transmitter from the packaging.
2. Attach Antenna To base connector
5.The Coaxial or Optical cable on the rear of the transmitter can be
connected to the digital output jack of the DVD, CD, TV
,
HDTV, XBOX XBOX360 or Game Console
6. The 3.5mm audio connector on the transmitter can be connected
to stereo 2 channel device outputs on TV,DVD,VCR,Strero,
MP3 Player or other 2 channel audio device.
Use the LINE IN connection.
TRANSMITTER
4
.
Connect the AC power adapter to an electrical wall outlet.
TO AUDIO OUT JACK
OPTICAL CABLE
TO PLAYER
WITH COAXIAL OUTPUT
TO PLAYER
WITH OPTICAL OUTPUT
3
COAXIAL CABLE
TO COAXIAL JACK
1. Switch the ON/OFF button on the headphone receiver OFF
2. Plug the charge cord into the charge input jack of the headphone
receiver to charge the batteries.
3. The charging green LED on the headphone is turned on when
the charging process starts and is turned off when the batteries
are fully charged Charge the batteries for at least 3 hours prior
to the first use of the headphone system.
CHARGING THE BATTERIES
CHARGE INPUT
CHARGE CORD
CHARGE
INDICATOR
(GREEN)
Caution : Do not use other types of batteries to replace the
rechargeable (Lithium-polymer) battery When you are not
using the headphone receiver, please switch it to OFF to
avoid damage to the batteries.
The battery pack must be fully charged prior to operation. An initial
charge of 3 hours is required to ensure the extended life of the
rechargeable batteries. Be sure the headphone receiver is in the
OFF position during charge status.
Important : Before recharging, make sure the recharging
cord is fully plugged into the headphone
6
