12.3
Managing HDD Group
12.3.1
Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1.
Enter the Storage Mode interface.
Menu > HDD > Advanced
2.
Set the
Mode
to Group, as shown in Figure 12. 11.
Figure 12. 11
Storage Mode Interface
3.
Click the
Apply
button and the following Attention box will pop up.
Figure 12. 12
Attention for Reboot
4.
Click the
Yes
button to reboot the device to activate the changes.
5.
After reboot of device, enter the HDD Information interface.
Menu > HDD > General
6.
Select HDD from the list and click the
icon to enter the Local HDD Settings interface, as shown in
Figure 12. 13
Local HDD Settings Interface
7.
Select the Group number for the current HDD.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
