manualshive.com logo in svg

LT Security LTD2408-2416, User Manual

Share
Download
LT Security LTD2408-2416 User Manual Download Page 108

Digital Video Recorder User Manual 

102 

Appendix A

 

 FAQ 

Q1. Why the DVR cannot start after connected to the power? 

a. The adapter has been damaged. Please change an adapter 
b. The power of the adapter is not enough. Please remove the HDD to check 
c. Hardware problem 
 

Q2. The indicator of the DVR lights, but no output. Why? 

a. The power of the adapter is not enough. Please remove the HDD or change an adapter to try. 
b. The video format of the DVR is different from that of the monitor. 
c. Connection problem. Please check the cable and the ports of monitor and DVR. 
 

Q3. Why are no images displayed on parts or all of the channels of the DVR? 

a. Connection problem. Please check the cable and the ports of camera and DVR. 
b. Camera problem. Please check the cameras. 
c. The video format of the DVR is different from that of the cameras. Please change DVR system format. 
 

Q4. Cannot find HDD 

a. The power of the adapter is not enough. Please change an adapter to try. 
b. Connection problem. Please check the power and data cables. 
c. The HDD is damaged. Change a new one. 

Summary of Contents for LTD2408-2416
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands