© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
BC216-1S_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
• 1-loop version of BC216-1
• For the application in small systems
• Analogue ringbus technology with
unshielded detector cabling
• Menu-driven operation
• Easy commissioning through
AUTO setup
• 32–bit multiprocessor system
• EN 54/VdS-certifi ed
Fire is a permanent threat to life and property. There-
fore, immediate response to a fi re is imperative. The
main objective of fi re detection control panel Series
BC216 is to alarm and to react in time and, conse-
quently, save lives and protect property. For decades
LST have focused their aims to undertaking unrivaled
efforts in order to realize new innovations in the security
area. Research, development and production are loca-
ted within LST premises, thus guaranteeing fl exible and
reliable individual solutions.
Using a 32-bit multiprocessor system, the fi re detection
control panel Series BC216 ensures topmost effi ciency
and speed – prerequisites for saving lives and minimi-
zing damage to property.
The fi re detection control panel BC216–1S is designed
to be used in small systems with only one ADM loop. It
comprises an already completely mounted unit which
includes all basic components that are needed for the
operation of a 1-loop fi re detection control panel.
Slot 1 is by default equipped with a Loop Interface
LIF64-1 for the connection of an ADM loop, slot 2 is
inoperable.
The ADM loop principle offers intelligent analogue ring-
bus technology with bi-directional data transfer. The
loop provides for the software-aided administration of
up to 198 physical address points in a maximum of 128
detector zones. Conventional detectors can be integra-
ted into the ADM loop, if required, by means of conven-
tional zone modules.
Depending on the respective system, a Fire Brigade In-
terface FWI2-1, a Fire Brigade Interface Additional Board
FWZ2-1, an LED-Display Field LAB48 as well as further
optional componentries can be installed in addition.
Easy parameterisation on the control panel‘s display
and operating unit, via a PC keyboard, or by means of
a PC software enables you to tailor the control panel to
your individual requirements.
