TREX___
______________________________________________________________________________
10| Operating Manual ver. TREX-EN-1.1
For a correct operation, use a 4-poles cable. Two different channels are
necessary to make speakers works. One channel for LF and another one
for HF. Internal connection are made as follow:
Speakon Pinout
1+
1-
2+
2-
Transducer connector
LF+
LF-
HF+
HF-
TREX system operating mode is only Bi-Amp (LF 1- 1+; HF
2- 2+) and needs an external digital processor with custom
setup provided by LSS. on request it is possible to ask
setting parameter in order to use third part processor. If
your amplifier can manage a 2 Ohms Load and has
sufficient power, it is possible to connect a maximum of 4
speaker in parallel (total impedance will be 2 Ohms).
Before making connections between mixer and speakers, make sure the
mixer volume is turned down.
You can now use the system