______________________________________________________________________________
Operating Manual ver. AR208-EN-1.1 |7
APPLICATION
AR208 is a 2-way loudspeaker system designed specifically for vertical
curvilinear array that provides high output, low distortion sound
reinforcement for the entire range of pro audio application.
The 200 mm (8") low frequency cone with 51 mm (2") voice coil with
Neodymium magnet and 44 mm (1.75") voice coil high frequency
compression driver provides higher output and lower distortion plus
enhanced power handling capabilities for better performance in both touring
and permanently installed applications.
AR208 standard powering mode is full range passive.
It is possible to have powering mode Bi-Amp operation using internal
crossover filter, for more information ask to LSS technical services.
The AR208 was designed to support the widest possible range of pro audio
applications. The minimum configuration of this system is four enclosures,
for full performance eight or more are recommended.
PHYSICAL DESCRIPTION
TOP
BOTTOM
SIDE
REAR
[A]
[C] [D]
[B]
[J]
[E]
[F]
[G]
[H]
[I]
[A] Handle
[F] Wave Guide
[B] Rigging Holes
[G] Reflex
[C] Reflex Steel protection grid
[H] Angle Bar
[D] Steel protection grid
[I] Connection Panel
[E] Woofers Wave Guide
[ J] Angle Bar
Materials and construction meet the highest professional standards to ensure maximum reliability
