LSL-Motorradtechnik GmbH • D-47809 Krefeld
www.lsl.eu
Rev. 00 12/05/2010
Important mounting instructions:
To assure a proper clamping, the parts have to be clean and dry! Tighten the Crash
Balls with the outside bolts until they stick firm in the bore and can't be moved by
hand.
Don't try to tighten the Crash Balls with too much torque until the bolts are
blocked, the clamping rubbers would be destroyed! Check the Crash Balls for proper
clamping a few days after first installation, then periodically every 3 month. Tighten
them again if necessary.