LSIS G100, Operation Manual

Page: 169 / 343

Group Code Name Setting
Setting
Range
Unit
dr 92 Parameter save
0 None
0~1 -
1
Parameter
save
5.21 Parameter Initialization
The parameter changed by the user can be initialized to the factory default settings.
Initialize the data of all groups or initialize data by selecting specific groups. However,
during a fault trip situation or operation, parameters cannot be initialized.
Group Code Name Setting
Setting
Range
Unit
dr 93 Parameter initialization 0 No 0
–14
-
Parameter Initialization Setting Details
Code and
Features
Description
dr.93
Parameter Init
Configuration Function
0 No
-
1 Initialize all groups
Initialize all data. Select 1 (All Grp) and
press [PROG/ENT] key to start
initialization. On completion, 0 (No) will
be displayed.
2 Initialize dr group
Initialize data by groups. Select initialize
group and press [PROG/ENT] key to start
initialization. On completion, 0 (No) will
be displayed.
3 Initialize bA group
4 Initialize Ad group
5 Initialize Cn group
6 Initialize In group
7 Initialize OU group
8 Initialize CM group
9 Initialize AP group
11 Initialize AO group
12 Initialize Pr group
13 Initialize M2 group
14
Initialize Operation
Group