manualshive.com logo in svg

LSI Symbios SYM22801, User Manual

Share
Download
LSI Symbios SYM22801 User Manual Download Page 55

Exiting the SCSI BIOS Configuration Utility

3-13

Verify  – This option allows the user to read all the sectors on a disk 
looking for errors. When selected, this option displays the following 
message:

“Verify all sectors on the device

 Press ESC to abort

 Else press any key to continue”

Help  – This option brings up a help screen with information about the 
Device Selections Menu.

Restore Default Setup  – This option resets all device selections back 
to their default settings. Select this option to restore all manufacturing 
defaults for the specified adapter. Note that all user customized options 
will be lost upon saving after restoring default setup.

Exit this menu  – This option allows the user to leave the Device 
Selections Menu and return to the previous screen.

3.3  Exiting the SCSI BIOS Configuration Utility 

Since some changes only take effect after the system reboots, it is 
important that the user exit from this SCSI BIOS Configuration Utility 
properly. Return to the Main Menu and exit via the Quit option. Rebooting 
the system without properly exiting from this utility may cause some 
changes to not take effect.

Summary of Contents for Symbios SYM22801

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands