background image

Document P/N: 80-00165-01 Rev. A 

iTBBU03 P/N: 01126

Version 1.0, November 2006

Find a list of LSI Logic Corporation’s U.S. distributors, international distributors, 
sales offices, and design resource centers on the LSI Logic web site at: 

http://www.lsilogic.com/contacts/index.html

®

LSI Logic, the LSI Logic logo design, and MegaRAID are trademarks or registered 
trademarks of LSI Logic Corporation. All other brand and product names may be 
trademarks of their respective companies.

Copyright © 2006 by LSI Logic Corporation. All rights reserved.

LSI Logic Corporation reserves the right to make changes to any products and ser-
vices herein at any time without notice. LSI Logic does not assume any responsi-
bility or liability arising out of the application or use of any product or service 
described herein, except as expressly agreed to in writing by LSI Logic; nor does 
the purchase, lease, or use of a product or service from LSI Logic convey a license 
under any patent rights, copyrights, trademark rights, or any other of the intellec-
tual property rights of LSI Logic or of third parties. 

The memory socket is mounted flush with the 
RAID controller. The iTBBU03 is parallel to the 
RAID controller when properly 

installed.

Figure 2 Installing the iTBBU03 in the MiniDIMM 

Socket on the MegaRAID SAS 8888ELP 
RAID Controller

Step 6

Press the iTBBU03 firmly into the memory 
socket. 

As you press the iTBBU03 into the socket, it 
clicks into place when it is properly seated in the 
socket. The arms on the sides of the socket 
rotate into the notches on the sides of the 
iTBBU03 to hold it securely in place.

Step 7

Install the MegaRAID SAS 8888ELP RAID 
controller in the computer, as shown in 

Figure 3

.

Press down gently, but firmly, to ensure that the 
RAID controller is properly seated in the slot. The 
bottom edge of the RAID controller must be flush 
with the slot.

Caution:

Never

 apply pressure to the LSIiTBBU03 or to the 

DIMM when inserting the SAS 8888ELP RAID 
controller. Instead, press down only on the top 
edge of the RAID controller, as shown in 

Figure 3

.

Figure 3 Installing the MegaRAID SAS 8888ELP 

RAID Controller

Step 8

Attach the RAID controller to the computer 
chassis with the bracket screw.

Step 9

Attach the cables, as needed, to the connectors 
on the RAID controller.

Step 10

Replace the computer cover, and reattach the 
power cord(s).

T E C H N I C A L   S U P P O R T

For assistance in installing the iTBBU03, contact LSI Logic 
Technical Support:

E-mail: 

[email protected]

[email protected] (Europe)

Phone Support: 

1-800-633-4545 (North America)

+44 1344 413 441 (Europe)

Web Site:

 

http://www.lsilogic.com/support/support_form.html

http://www.lsilogic.com/support/phone.html

Reviews: