Open Boot BIOS
4-15
Ver. 2.0
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
d) /pci@1f,0/pci@1,1/ide@3/disk
e) /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3203f0
q) NO SELECTION
Enter Selection, q to quit: a
/pci@1f,0/pci@1/IntraServer,fc@2/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y for creating devalias mydev for
/pci@1f,0/pci@1/IntraServer,fc@2/disk
ok select /pci@1f,0/pci@1/IntraServer,fc@2
ok show-children
MPT Firmware Version 1.00
Target 0
Unit 0
Disk
SEAGATE ST39173FC
6615
WWN 200000203710c4e8 PortID a3
ok set-persistent
<- command with no arguments prints help
usage is <current-target-id> <persistent-target-id> set-persistent
ok 0 0 set-persistent
ok show-persistent
Entry 1 WWN 200000203710c4e8 Target 0
To clear an entry in the persistent device map, use the clear-persistent
command:
ok 1 clear-persistent
Entry 1 has been cleared
ok show-persistent
ok
Entry 1 has been deleted from the table, and the table is now empty.
4.8.8 Manual Selection of Fibre Channel Topology
Under certain configurations, it may be desired to force the selection of
Fibre Channel topology, and disable the auto detect mechanism in the
Fibre Channel adapter. This can be done on a port by port basis, by
using the following procedure. Note that it should not be necessary to
