LSI CDHT Series, User Manual

Page: 10 / 24

Figure 1
Unpacking
2.0 Setting Up Your Tester
2.1 Unpacking
Lay the shipping box on its side and pull out the two styrofoam pieces that encase the tester. Check to make sure that
you have the following items as shown in Figure 1.
* SAVE PACKAGING TO RETURN TESTER TO LSI FOR CALIBRATION *
4 Stop Rods (0, 1 or 2)
These items are placed
in the Accessory Box.
5 Handle
6 Power Adapter
7 Handle Clamp
2 Calibration Report
3 This User Manual
Accessory Box
Shipping Box
1 Tester
6