UNITOUR Power System
User Manual
Page 38
3.15
View Sources
F
rom the “Home Menu” tap
LOG IN
,
ADVANCED
,
VIEW
SOURCES
.
The “View Sources” menu can be used to view the DMX levels from the source that you tap
at the bottom of the screen. Tap
SHOW SLOTS
to see an overlay of all slot numbers in the
universe.
Tap
CHANNEL INPUT
to display the values at the input of each channel. This can help you
identify issues when the channel is incorrectly patched or it is set to ALWAYS OFF or ALWAYS
ON. Channels with no control source are shown in black.
CHANNEL INPUT Selected
3.16
View Logs
UNITOUR automatically recognises condition changes that occur in the system and stores
them in a log. You can select the types of condition changes that will generate an entry into
the log. See section 3.21.2.
To view the events that have been logged, f
rom the “Home Menu” tap
LOG IN
,
ADVANCED
,
VIEW LOGS
.
