©
LSC
®
- www.LightStreamControls.com - SD Disk Drive™™ Instruction Manual Page 3
©
LSC
®
- www.LightStreamControls.com - SD Disk Drive™™ Instruction Manual Page 4
SD Disk Drive™
Safety Precautions
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 7 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
SD Disk Drive™
General Instructions
The SD Disk Drive™ carries a one year limited warranty. Please
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.)
number. The R.A. number must be clearly written on the out-
side of the return package. A brief description of the problem as
well as the R.A. number must also be written down on a piece
of paper included in the shipping carton. If the unit is under
warranty, you must provide a copy of your proof of purchase
invoice. You may obtain a R.A. number by contacting our cus-
tomer support team on our toll free customer support number.
All packages returned to the service department not displaying
a R.A. number on the outside of the package will be returned to
the shipper.
SD Disk Drive™
Product Registration
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the
basic operations of this unit. These instructions contain impor-
tant safety information regarding the use and maintenance of
this unit. Please keep this manual with the unit, for future refer-
ence.
Keyboard (Sold Separately):
You may use any off the shelf
PS-2 Keyboard to name scenes, shows, and other profiles in
the Show Designers memory.
Trackball/Mouse (Sold Separately):
You may connect any off
the shelf mouse or trackball to the SD Disk Drive. This allows you
control the pan and tilt movements of a selected fixture on the
Show Designer.
SD Disk Drive™
Optional Accessories
