background image

©

LSC

® 

  www.LightStreamControls.com   SD Disk Drive™™ Instruction Manual Page 2

  SD Disk Drive™™ 

 

  

 

 Introduction

Introduction: 

T

hank  you  for  purchasing  the  SD  Disk  Drive™  from 

LSC

®

,  the  perfect  companion  to  any  Show  Designer™  controller. 

The SD Disk Drive™ is a 19” rack mount accessory that allows you 
to back-up and upload vital information to and from any member of 
the Show Designer™ family (Show Designer™, Show Designer 1™, or 
Show Designer 2™ ). The SD Disk Drive connects directly to a Show 
Designer and provides a 3.5” floppy disk drive, a PS-2 keyboard jack, 
a MIDI “IN” port, a MIDI “OUT” port, and two RS-232 jacks. The MIDI 
connections can be used to connect to other MIDI devices that use 
MIDI as a method to back-up memory.

Unpacking: 

Every SD Disk Drive™ has been thoroughly tested and 

has been shipped in perfect operating condition. Carefully check the 
shipping carton for damage that may have occurred during shipping. 
If the carton appears to be damaged, carefully inspect your unit for 
any damage and be sure all accessories necessary to operate the unit 
have arrived intact. In the event damage has been found or parts are 
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without 
first contacting customer support. 

Customer Support:

 LSC

®

 provides a toll free customer support line, 

to provide set up help and to answer any question should you encoun-
ter problems during your set up or initial operation. You may also visit 
us on the web at www.LightStreamControls.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:
00 p.m. Pacific Standard Time.
 

Voice:  (800) 322-6337    Fax:   (323) 582-2610

 

E-mail:  [email protected]

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact LSC at the toll free number.

At  LSC

®

  we  are  concerned  about  the  environment,  and  package  all 

our units in recyclable material. Please do not dispose of the shipping 
carton in the trash, recycle whenever possible.

LSC 

4295 Charter Street

Los Angeles Ca. 90058

www.lightstreamcontrols.com

User Instructions

6/03

Summary of Contents for SD Disk Drive







Reviews: