Redback Dimmer
Meet the Redback
Operator Manual V1.1
1.6 Load Circuit Breakers
1.8 Load sockets
Each load circuit is protected by a 10amp
miniature circuit breaker. For normal operation the
circuit breaker lever should be in the up position,
displaying a red indicator triangle (as illustrated).
The 4RU version of the Redback has the load
sockets mounted on the front panel.
The 2RU version of the Redback has the load
sockets mounted on the rear panel.
1.9 Power supply entry
To facilitate the installation of permanent wiring or
flexible cable suitable for your specific
requirements, Redback is supplied with a cable
clamping grommet fitted to the supply entry point.
1.10 MIDI input (optional)
The standard 5 pin DIN MIDI IN (Musical
Instrument Digital Interface) input socket allows
any MIDI controller to set dimmer levels using
note velocity values.
The indicator triangle is green if the circuit breaker
has been switched off or has tripped due to a
fault.
1.7 DMX512 sockets
Redback is DMX512 (1990) or DMX512-A (E1-11)
and RDM (E1-20) compliant, with standard XLR 5
pin
Input
and
Through
sockets.
LSC Lighting Systems (Aust) Pty. Ltd
Page 3
Summary of Contents for Redback 12 Channel
Page 4: ......
