V3.1 May 2007
DMXchange Operator Manual
LSC Lighting Systems (Aust) Pty Ltd
7
2.4.1 Setting up the Names
Selecting “SET_UP” will display
DONE |Setup system password? |PASSWORD
MORE |Load or save Presets? | PRESETS
Selecting “MORE” will display
DONE |Set data stream names? | NAMES
MORE |Clear current patch? | CLEAR
Selecting “NAMES” will display
DONE |Set data stream names | INPUT
|Select I/P or O/P? | OUTPUT
At this point, either the input or the output names may be selected and set-up.
Selecting “INPUT” will display.
DONE |Input 01 is shown as: | EDIT
HIDE |Name: INPUT 01 | NXT IN+
Pressing “HIDE” will display “Input 01 is HIDDEN”. And the stream will not appear in the
patch menu. Thus if any streams are unused then hiding them makes patching easier. The
Stream can always be changed back to “SHOWN” at a later stage. Press “NXT IN+” to select
the next input or “EDIT” to edit the name.
The “EDIT” screen looks like this.
SAVE |Input 01 is shown as: | INC(+)
CURSOR |Edit: INPUT 01 | DEC(-)
The “INC” and “DEC” buttons will change the character indicated by the cursor. Holding
down either button will cause continuous scrolling.
The “CURSOR” button will advance the cursor to the right. Note that a maximum of 14
characters are allowed for any name in the
DMXchange
.
The “SAVE” button will save the new name and return to the previous menu.
After a stream has been given a name, this name will appear in place of the input or output
reference.
E.g. If Input 01 is named “Prompt Corner” then any menu that would usually display “Input
01” will now show “Prompt Corner” instead.
2.4.2 Setting Up a Password
From the main menu select “SETUP”. The display shows.
DONE |Setup system password? |PASSWORD
MORE |Load or save Presets? | PRESETS
Select “PASSWORD”. The display shows.
SAVE |Enter new password as | INC(+)
CURSOR |desired: ‘ ‘ | DEC(-)
Set-up a four character alphanumeric name and press “SAVE”.
