LS tractor MT458, Operator'S Manual

Page: 218 / 242

5 - 56
(5) Tail/brake light bulb and turn signal light bulb- Replace
1
3
2
②
Side light/Front turn signal light
bulb replacement - Cabin models
1. Remove the screw ① retaining the turn signal
light lens and remove the lens.
2. Push in on the turn signal light bulb ② and
rotate counterclockwise in the socket to remove
the old bulb.
3. Insert the new bulb into the socket and turn the
bulb in a clockwise direction until tightened.
4. If the side light bulb ③ is damaged, open an
electrode terminal and pull out the bulb, and
replace it with a new one.
5. Install lenses and retaining screw
①
.
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
① Tail/brake light bulb and rear turn
signal light bulb replacement
1. Remove the two screws
①
retaining the taillight
lens and remove the lens.
2. Push in on the tail/brake light bulb ② or turn
signal light bulb
③
and rotate counter-clockwise
in the socket to remove the old bulb.
3. Insert the new bulb into the socket and turn the
bulb in a clockwise direction until tightened.
4. Install lenses and retaining screws ① .
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
1
3
2