LS tractor MT345E, Operator'S Manual

Page: 94 / 214

3 - 28
(4) Work light switch
- Rear work light
 The rear work light has a switch on its back. To
turn on/off the rear work light, operate the switch
as shown in the right figure.
ON
OFF
▶
When driving on the road at night, do not let the rear work light(s) stay ON. It may
cause a disturbance to the driver of the following cars.
Caution
(5) Four wheel drive lever (4WD)
 This lever is used to engage/disengage the four
wheel drive (4WD). Pull it backward to engage
the 4WD and push it forward to engage the 2WD.
 Before operating the 4WD lever,
- press down the clutch pedal (if fitted) and brake
pedals.
- stop the tractor completely.
 4WD is very effective in the following cases.
- When increasing the towing power for heavy
work.
- In case of working in sandy soil.
- To prevent tractor from spinning in wet land.
Four wheel
drive lever
4WD
2WD
▶
When driving on public roads, disengage the 4WD. If not, it may cause damage of
the tires and transmission drive lines and a serious accident. After working in the
field, disengage the 4WD before coming out from the field.
▶
While driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause a serious accident.
▶
The 4WD lever can NOT be shifted while driving. Operate the lever after stopping
the vehicle completely.
Caution