BACKHOE MOUNTING
STEP 5.
Set the parking brake of the tractor, Make sure the PTO switch is in the off position
CAUTION:
This is the Backhoe's Operator's manual for Safety Precautions and Tractor Preparations.
STEP 6.
STEP 7.
STEP 8.
Install the Mounting Bracket Pins into the holes. Raise the boom and stabilizers from the ground.
Move the tractor to put the subframe front side into the loader midmount slowly. Set the subframe
crosser parallel to the mounting bracket by using the backhoe control levers to lower the
stabilizers and boom to raise the subframe.
Release the parking brake of tractor, move the tractor backward very carefully until the subframe
is fully engaged in both mounting devices on the tractor.
MODEL: K5047/K5055-2WD, K5055-4WD
Cross Bar
Mounting Bracket
Subframe
Subframe Crosser
Backhoe Frame
MODEL: U43/47, U55
MODEL: XU5055/XU5055C, XU5065/XU5065C
MODEL: XU6158/XU6163/XU6168
MODEL: XR4000 series
MODEL: XR4100 series
- 18 -
