10
[email protected] TEL: 321 987 9424
GETTING STARTED
LS XP1 PORT RECHARGEABLE
The LS PRO System comes with everything needed to start your light therapy
experience. For the best results please read this completely before you start using
your LS XP1 Port Recharageable. The LS PRO System may be used multiple times
per day, with a recommended therapy session for 20 to 40 mins. Your LS XP1 Port
Recharageable automatically switches off after a 20 min session. An immediate second
20 min session works by moving the pad/s to different areas of the body. Open all your
products and check you have everything listed on the product check sheet.
POWERING ON
TO CHARGE (ONLY USE THE WHITE POWER CABLE/CHARGER)
1.
Locate White Power Charger Cable (fig. 1) and White Charger Adaptor (fig. 2).
2.
Connect the two by plugging the two-pin male adaptor (fig. 3) into the Charger
Adaptor (fig. 2).
3.
Assembled Charger complete should look like (fig. 4).
4.
Connect White Power cable to the wall socket.
5.
Plug the male connector (red circled fig. 4) into the DC Power Input on the back of
your 1 Port Rechargeable (fig. 5).
6.
A flashing light circled (fig. 6) indicates that the unit is charging. Full charge takes
approx. 3 hours.
7.
The unit is fully charged when the charging indictor light stays on constantly.
8.
Do not attempt to use the 1 Port Rechargeable for therapy while it is charging,
always remove the charger for use.
9.
You are now ready to use your 1 port Rechargeable.
TO USE
10.
Proceed by pushing your choice of pad/s using 5 pin plug (fig. 7) into the 5 pin port
on the top of your controller (fig. 8).
11.
Secure your light pads to the desired area of the body with Velcro straps provided
(fig. 9).
12.
Press the power/mode button on your controller (fig. 10), this may be followed by a
beep and the LED Mode Indicator display should light up (fig. 11).
13.
Choose your desired setting by pressing the power/mode button (fig. 10)
repeatedly (see simplified frequency guide).
