MOWER SET-UP
CUTTING HEIGHT ADJUSTMENT
The cutting height of the equipment depends on the position of the wheels.
If the wheels are raised, the cutting height increases; if the wheels are lowered, the cutting height decreases.
Make sure that the wheels are set at the same height on both sides.
To adjust the cutting height on the mowers loosen and remove pin A and adjust the wheel height according
to the bushing B, C, D. When adjustment is completed, reinsert the pin A.
BELTS ADJUSTMENT
machine works in the right way and decreases the wear of rotating parts. To adjust the belts tension:
lowered in the middle part not more than 10mm.
loosened; when the belt is correctly tensioned it can be
tensioned, while turning it counterclockwise they are
belts; if turn the screw in clockwise direction the belts are
In the LS Mtron mowers it is possible to adjust the tension of the belt; the right belts tensioning insures that t
- Loosen the Bolts E, screw or Unscrew the Nut A to adjust the tension of the
- Unscrew the Wing screw B and remove cover RH/LH C and D.
- Re-install the C and D covers.
- Re-toque the bolts E according to the torque tightening chart (Page. 14)
-28-