LS ELECTRIC SV-iS7 Series, User Manual

Page: 219 / 491

Learning Advanced Features
202
Code Description
DRV-12 JOG Acc Time Sets the acceleration speed for a jog operation.
DRV-13 JOG Dec Time Sets the deceleration speed for a jog operation.
If a signal is entered at the jog terminal while an Fx operation command is on, the operation
frequency changes to the jog frequency and the jog operation begins.
8.2.2 Jog Operation 2-Forward/Reverse Jog via Multi-function
Terminal
For jog operation 1, an operation command must be entered to start an operation, but while
using jog operation 2, a terminal that is set for a forward or reverse jog also starts an operation.
The priorities for the frequency, acc/dec time and terminal block input during operation in
relation to other operating modes (Dwell, 3-wire, up/down, etc.) are identical to jog operation 1.
If a different operation command is entered during a jog operation, it is ignored and the
operation maintains the jog frequency.
Group Code Name LCD Display Parameter setting Setting Range Unit
DRV
11 Jog frequency JOG Frequency 10.00 0.5 – Max Freq Hz
12
Jog operation
acceleration time
JOG Acc Time 20.00 0.00 – 600.00 sec
13
Operation
deceleration time
JOG Dec Time 30.00 0.00 – 600.00 sec
IN 65 – 75
Px terminal
configuration
Px Define
(Px: P1
– P8
[optional: P9 – P11])
46 FWD JOG
- -
47 REV JOG