LS ELECTRIC LSLV-H100 Series, User Manual

Page: 342 / 618

Learning
Protection Features
329
Group Code Name LCD Display Parameter Setting Setting range Unit
IN
65
–
71
Px terminal
setting options Px Define
(Px: P1
–P7)
5 BX 0-55 -
Output Block by Multi-function Terminal Setting Details
Code Description
IN-65
–71
Px Define
When the operation of the multi-
function input terminal is set to ‘5 (BX)’ and is
turned on d
uring operation, the inverter blocks the output and ‘BX’ is displayed on
the keypad display. While ‘BX’ is displayed on the keypad screen, the inverter’s
operation information including the operation frequency and current at the time of
the BX signal can be monitored. The inverter resumes operation when the BX
terminal turns off and operation command is input.
6.3.5 Trip Status Reset
Restart the inverter, using the keypad or analog input terminal, to reset the trip status.
Group Code Name LCD Display Parameter Setting Setting range Unit
IN 65
–71
Px terminal
setting options Px Define
(Px: P1
–P7)
3 RST 0-55 -
Trip Status Reset Setting Details
Code Description
IN-65
–71
Px Define
Press the [Stop/Reset] key on the keypad or use the multi-function input terminal
to restart the inverter. Set the multi-
function input terminal to ‘3’ (RST) and turn on
the terminal to reset the trip status.
6.3.6 Operation Mode for Option Card Trip
Option card trips may occur when an option card is used with the inverter. Set the operation
mode for the inverter when a communication error occurs between the option card and the
inverter body, or when the option card is detached during operation
.