LS ELECTRIC LSLV-H100 Series, User Manual

Page: 282 / 618

269
Learning Advanced Features
5.44.3 Auto Change
The auto change function enables the inverter to automatically switch operations between
main and auxiliary motors. Prolonged continuous operation of a motor deteriorates motor
capabilities. The auto change function switches the motors automatically when certain
conditions are met to avoid biased use of certain motors and protect them from
deterioration.
Group Code Name LCD Display Parameter Setting Setting Range Unit
AP1
55
Auto change
mode selection
Auto Ch Mode
0 None 0 None
-
1 Aux motor 1
AUX
Exchange
2 Main motor 2
Main
Exchange
56 Auto change time Auto Ch Mode
Time value within
the range
00: 00
–99: 00 Sec.
57
Auto change
frequency
Auto Ch Level
Frequency value
within the range Low Freq
–
High Freq
Hz
58
Auto change
operation time
Auto Op Time
Time value within
the range
- Sec.
Auto Change Setting Details
Code Description
AP1-55 Auto Ch Mode
Select the motors to apply the auto change function.
Setting Description
0
None
1 Aux Exchange
2 Main Exchange
Refer to Examples of Auto Change Sequences below for details.
AP1-56 Auto Ch Time Sets the auto change intervals.
AP1-57 Auto Ch Level
The parameter is for Main Exchange. In case that [AP1-55 Auto Ch
Mode] is set to Main Exchange, all the conditions for Auto Change
are met under the frequency in which output frequency of Main
motors are set in AP1-57. AP1-57 is the frequency to activate Auto
Change.