LS ELECTRIC LSLV-H100 Series, User Manual

Page: 263 / 618

250
Learning Advanced Features
Code Description
1 View Changed Display changed parameters only
5.39 User Group
Create a user defined group and register user-selected parameters from the existing
function groups. The user group can carry up to a maximum of 64 parameter registrations.
Group Code Name LCD Display Parameter Setting Setting Range Unit
CNF
42
Multi-function key
settings Multi Key
Sel
3 UserGrp SelKey - -
45
Delete all user
registered codes UserGrp
AllDel
0 No - -
User Group Setting Details
Code Description
CNF-42 Multi Key Sel
Select 3 (UserGrp SelKey) from the multi-function key setting options.
If user group parameters are not registered, setting the multi-function
key to the user group select key (UserGrp SelKey) will not display
user group (USR Grp) items on the Keypad.
Follow the procedures below to register parameters to a user group.
No Procedure
1
Set CNF-
42 to ‘3 (UserGrp SelKey)’. A
icon will be
displayed at the top of the LCD display.
2 In the parameter mode (PAR Mode), move to the parameter
you need to register and press the [MULTI] key. For example,
if the [MULTI] key is pressed in the frequency reference in
DRV-01 (Cmd Frequency), the screen below will be displayed.
❶
Group name and code number of the parameter
❷
Name of the parameter
❸
Code number to be used in the user group. Pressing the
[PROG/ENT] key on the code number (40 Code) will register
DRV-01 as code 40 in the user group.