LS ELECTRIC LSLV-H100 Series, User Manual

Page: 118 / 618

105
Learning Basic Features
4.6.3 Terminal Block as a Command Input Device (Run and
Rotation Direction Commands)
Multi-function terminals can be selected as a command input device. This is configured by
setting DRV-06 (command source) in the Drive group to 2(Fx/Rx-2). Select 2 terminals for
run and rotation direction commands, and then select the relevant codes (2 of the 5 multi-
function terminal codes, IN-65
–71 for P1–P7) to 1 (Fx) and 2 (Rx) respectively. This
application uses an Fx input as a run command, and an Rx input
to change a motor’s
rotation direction (On: Rx, Off: Fx).
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
DRV 06
Command
source Cmd
Source
2 Fx/Rx-2 0
–5
-
IN
65
–
71
Px terminal
configuration
Px Define
(Px: P1
–
P7)
1 Fx
0
–55
-
2 Rx
Run Command and Fwd/Rev Change Command Using Multi-function Terminal
–
Setting Details
Code Description
DRV-06 Cmd Source
Set to ‘2 (Fx/Rx-2)'.
IN-65
–71 Px Define
Assign a terminal for run command (Fx).
Assign a terminal for changing rotation direction (Rx).