background image

12

 

 

  

Comissioning / Operation 

 

 

3.7

 

Bed adjustment

 

Caution 

 

Before making any adjustments: 

Check that neither you nor anyone 

else or any pets are at risk from the 

moving parts of the adjustment 

mechanics!

 

Use buttons

 

1

 to 

10

 for the bed 

adjustment. As long as you keep the 

buttons pressed, the drives will move.

 

3.8

 

Memory positions

 

Saving memory positions

 

Adjust the bed until you have reached 

a comfortable position. Then proceed 

as follows:

 

 

Press button 

13

 3 times followed 

by one of the memory buttons 

11

 

or 

12

.

 

 

The current position is assigned to 

the corresponding memory button 

and saved.

 

Recalling memory positions

 

Caution 

 

Before using the memory buttons: 

Check that neither you nor anyone 

else or any pets are at risk from the 

moving parts of the adjustment 

mechanics!

 

Stored positions can be recalled with 

the memory buttons.

 

Proceed as follows:

 

 

Press one of the buttons 

11

 or 

12

 

and keep it pressed.

 

 

The adjustment drives will move to 

the saved positions and  switch 

off then.

 

Zero-Gravity position

 

 

Press button 

14

 and keep it pressed.

 

 

The adjustment drives will move to 

the zero-gravity position and switch 

off then.

 

The zero-gravity position is a memory 

position that can‘t be changed!

 

Summary of Contents for VFF/CDL-CF-15

















Reviews: