LRS T9601 User Manual Download | Manualshive

Page: 21 / 29

background image

Troubleshooting

Transmitter Unit

The Light On The Keypad Display Does Not Come On When A Key Is Pressed

• Check the charging power supply by plugging the power/charging supply used for the pager

charger into the transmitter unit.

• If the display light comes on, there may be a problem with the T9601 power/charging supply.

Call LRS Customer Support to order a new power supply.

• If the display still does not light, there may be a problem with the transmitter unit. Call LRS Cus-

tomer Support for assistance.

The Keypad Display Is Functioning Properly But The Pager Does Not Receive the Page

• Perform a system reset (see “System Reset” pg. 10).

• Make sure that pagers are on the same system ID (see “Set System ID” if ID is not “0”)

• Complete the steps for paging a pager (see “Paging” pg. 9).

• If the pager still does not receive the page, call LRS Customer Support for assistance.

Pagers

Pager Charge Lights Do Not Come On

Charging slots should display a single red charge light when pagers are placed in the charger, and are charg-
ing correctly. If the red charge light is not visible on some or all charging slots, review the following recom-
mendations to determine and solve the problem..

• Make sure the pagers are completely inserted into the charging slot.

• The power supply may be defective. Try plugging the power supply used for the transmitter

into the pager charger.

• You might have more pagers charging on one power supply than recommended. Only 25 pagers

can be charged on one 10V power supply. If you have more than 25 pagers, you should call LRS
to order additional chargers.

• You might have a jumper wire that is not properly connected. Look on the side of your charger

and verify that all wires are connected properly. If they are connected, then the metal contacts
on your pager may be dirty. Using a damp rag, clean the 2 metal contacts on the back of each
pager.

• Be sure that your staff is not disconnecting the power supply at anytime or that you do not have

the charger connected to a circuit that automatically shuts off after hours. The charging base
should be plugged into a power outlet that is “ON” at all times (Be sure the pager is not in the
charger backwards).

• If none of these recommendations solve your problem, call LRS Customer Support to deter-

mine the problem at 800-437-4996.

Battery Powered Pager Shows Low Battery:

Replace the battery.

Long Range Systems

20

T9601 User Manual

«
...
19
20
21
22
23
...
»

Summary of Contents for T9601






























Reviews:

No comments

Related manuals for T9601

Brand: Wireless Devices Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands