Long Range Systems
1
PRONTO Quick Guide
Each button on the one or six button PRONTO can be programmed to send a unique message
to separate pagers or group of pagers.
Installation
To put the PRONTO in operation:
Note:
If your Pronto is not already programmed, refer to the programming guide first.
1. Install the 2-batteries in the PRONTO (note the positive and negative end)
2. Locate and install the mounting bracket where it is to be used.
3. Position the unit into the notches in the mounting bracket and press until latch
engages.
4. Turn on the pager (refer to the pager booklet).
5. Press the button(s) on the PRONTO to test that the pager is receiving the messages.
To program your PRONTO refer to your programming guide.
PRONTO
™
Six and One Button Paging System
QUICK SETUP & OPERATION
Six Button Front
One Button Front
Six & One Button Back
Repage Magnet Sensor
