P a g e 5 | 9
LPS-Lasersysteme Siegmund Ruff / CEO Haidschwaerze 18 72131 Ofterdingen Germany
Phone: +49 7473 271177 www.lps-laser.com [email protected]
1.3.2
Mount on a Spike system
To mount the SpectraL³ device on a Spike laser system, you need to open the four screws which are
marked with the red arrows (two screws on the top and two screws on the bottom).
You do not need to open the screws which are marked with the green arrows.
Use the same four screws to fix the SpectraL³ device on the laser system, as shown in the picture
above.
