LPSC-008
1. Lift Lever
2. Tone-arm
3. Speed Control Selection Switch
4. AUTO STOP ON/OFF Switch
5. Tone Arm Clip/Rest
6. Stylus(Needle) Cartridge
7. Power Switch(VOLUME CONTROL KNOB)
8. Indicator
9. Function Knob
10. Turntable Platter
11. 45RPM adaptor
12. DC IN Power Jack
13. L/R RCA Output Jack
Connect the main unit and the speakers with the RCA cable.
Firmly and securely insert the DC plug of the adaptor to the
DC IN Jack
on the back of the unit.
Plug the adaptor’s AC plugs into a power outlet.
1. Switch the function knob to BT. The indicator will become blue color with flashing.
2. Turn on your Bluetooth function on your mobile phone or tablet PC and then search the turntable
player with its name . After pairing and connection, the Bluetooth indicator will become
blue color without flashing, and you can play your music of your mobile phone or tablet PC on this
turntable player.
3. Turn the VOLUME CONTROL KNOB to adjust the volume.
Remark: AUTO STOP function applies to most 33RPM vinyl records. However, for very few
vinyl records, it will stop when it does not come to the end, or it will not stop when it comes
to the end when AUTO STOP is ON.
Remark: the mobile phone or tablet PC's volume level also impact the overall volume;
please adjust that as well to have a satisfying sound.
1. Switch the function knob to PH mode. Turn on the power switch knob. The indicator will become
red color.
2. Place a record on the turntable platter and select the desired speed (33/45/78) according to the
record. NOTE: when playing a 45RPM record, use the included 45RPM adaptor.
3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever
backward to raise the tone-arm and gently move the tone-arm to the desired position over the
record. The turntable will begin to spin when the arm is moved toward the record. Push the lift
lever forward to lower the tone-arm slowly onto the desired position on the record to begin
playing the record. Please note: The record will begin to spin only when the tone-arm is moved
toward the record if the Auto Stop is turned on.
4. If the Auto Stop Control Switch is turned ON, the record will stop automatically when finished.
If Auto Stop Control Switch is turned OFF, the record will NOT stop automatically when finished.
5. Turn the VOLUME CONTROL KNOB to adjust the volume.
Getting Started
Bluetooth Mode
Phono Mode
