14
CONTEMPORARY BACKREST
1. Pick up the cushion, head up.
Make sure the inner straps
dangle freely at the bottom of the
backrest. The end of the straps
should slightly extend beyond the
bottom of the cushion.
2. Begin slipping the bottom of
the backrest cushion over the
tubular backrest frame. Pass the
straps behind the padded part
of the top of the structure, then
over the two slats of the cradle
locking mechanism.
3. Continue to slip the cushion on the backrest
by pulling on the straps and/or the bottom
flap. Make sure to slide the mechanism
activation lever through the hole in
the backrest cover. If you encounter
resistance, stop pulling in case the straps
are not sliding correctly. Remove the
cushion and start over.
4. When the cushion is fully-lowered,
run the straps under the lower slat
of the tubular backrest structure.
These instructions apply to the Contemporain (Contemporary) backrest. If you
have another kind of backrest cushion, go to the next section.
Summary of Contents for Thera-Glide R Series
Page 22: ...22 VUE CLAT E EXPLODED VIEW...
Page 23: ...23...
