CONTROL PANNEL BUTTONS
Reset / Clicker Button (Black Button)
This button works two separate features. A quick push will either activate or deactivate
the included clicker. When activated an internal speaker on the SV-2400 will make a
single beep sound for each revolution of the spool similar to that of a traditional
“clicker”. The faster the spool turns the quicker the clicks become. The clicker only
sounds during the payout of line and is silent when line is being retrieved. The speaker
for the clicker is located under the control panel and volume can be adjusted by turning
the speaker cover.
The second function of the reset button is to zero the counter. This is accomplished by
“holding” the reset button for five seconds.
The “stop at zero” feature uses this as the reference point to turn the reel off.
WARNING:
Never push the reset button without first setting the rig at least 20 feet
below the top of the pole. Failure to do this could cause the fishing rig to retrieve
past the tip and the possible loss of gear and fish.
