LP Morgan Installation Instructions | 7
LP Morgan Galleria Manual
The material is held in the
frame with EzyGrip. The
EzyGrip sits in its special
channel to hold the tension in
the screen.
Insert EzyGrip in the order shown below. Start at the corner of the frame
and work along the edge. Cut to length if necessary. Following the diagram
below insert the EzyGrip into the first side then when installing on the
opposite side apply tension to the fabric with one hand while inserting
the EzyGrip with the other.
1
2
3
4
5
6
7
8
• Insert the EzyGrip in the order shown
• Avoid lifting up the fabric, as the
EzyGrip may pop out
Roll the screen material onto the back of the screen. There is a sticker
attached to show you which side is the viewing side.
Attaching the screen material
(Plana U / Novares / Rear Projection)
EzyGrip in the wrong channel
EzyGrip in the wrong way around
Correct insertion of EzyGrip
