LOYTEC L-Proxy, User Manual

Page: 71 / 150

L-Proxy User Manual 71 LOYTEC
Version 3.1 LOYTEC electronics GmbH
7.3 Project Settings
The project settings allow defining certain default behavior and default settings used
throughout the project. To access the project settings go to the menu
Settings Æ Project
Settings… . This opens the project settings dialog, which provides several tabs as described
in the following sections.
7.3.1 General
The general tab of the project settings as shown in Figure 60 contains settings independent
of the technology port. The settings are:
•
Project Name : This setting allows entering a descriptive name for the project.
•
Default FTP Connection Settings : Enter a user name and password for the default
FTP access. This access method is used implicitly when connected via LNS and the
device is accessible over IP. For this implicit connection, there is no dialog to ask for a
username and password and the username and the default password from the project
settings are used.
Figure 60: General Project Settings.
7.3.2 Data Point Naming Rules
The data point naming rules tab (see Figure 61) allows specifying how data point names
are automatically derived from scanned network variables. The preview shows how names
would look like, when the check marks are modified.