L-INX User Manual
189
LOYTEC
Version 4.0
LOYTEC electronics GmbH
NAT: 135.23.2.1
135.23.2.1
IP Channel
Fi NAT Router
Internet
IP: 192.168.1.100 : 1628
Forward ports 1628 and 1629
to IP address 192.168.1.100,
forward 1630 to IP address
192.168.1.102,
forward 1631 to IP address
192.168.1.103
IP: 192.168.1.102 : 1630
IP: 192.168.1.103 : 1631
FT-10
FT-10
192.168.1.1
Auto-NAT (135.23.2.1)
Auto-NAT (135.23.2.1)
Optional: CS
of the channel
Figure 153: Multiple L-INX devices behind a NAT: Extended NAT Mode.
After the NAT router has been configured with the port-forwarding settings and the CS has
been turned on, the channel members can be added. This can be done either on the console
UI or through the Web interface of the CS.
In the Web UI, add the members with their private IP addresses and the client ports as
defined by the port-forwarding. Then select the added member by checking the check box
and select the action
Assign to NAT
. Enter the public NAT address of the NAT router. An
example to add the two IP-852 devices in Figure 153 through the Web UI is depicted in
Figure 154. To remove a device from a NAT router but not delete it, select it and choose
Remove from NAT
as the action.
