Loyal Hands Watch, Manual

Page: 6 / 50

CALENDAR / DATE
To set the time:
1. PULL out Crown to C position.
2. TURN crown either way to correct time.
3. PUSH in crown to A position.
To set the calendar / date:
1. PULL out crown to B position.
2. TURN crown counter clockwise or towards you to correct date.
3. PUSH in crown to A position.
NOTE: The date changes automatically every 24 hours.
GAS RELIEF VALVE (only on some models)
HELIUM VALVE – The outer visual part of the gas valve is a safety protective locking crown to
protect the gas valve. The user is highly recommended to lock it all times when not using the
watch in the helium gas decompression chamber or living chamber. Even though the protective
locking crown is unlocked, the watch still can resist to 1000M SWP.
The valve will release gas when internal pressure reaches to about 5 Bars. If ascending within
30 meters water-depth from the Helium breathing chamber (Or decompresses within 3 bars in
the chamber), it is not necessary to open the protective locking crown.
Always rinse the watch (with protective crown opened) with warm fresh water after the protective
crown was opened in smutty water or seawater. Dry up before locking the crown.
AUTOMATICS WATCHES
Winding up the watch
Natural movements of your wrist wind up a central rotor of the automatic watch. A ball bearing
rotor produces a lot of energy, so you’ve got a long movement duration that provides running
without interruption.
If you haven’t used the watch for approximately 48 hours, we suggest winding up the crown
about 10 times before wearing.
5