About the product
Get access to your Smart Home with encrypted or unencrypted
NFC tags, via your NFC enabled smartphone or through your
own unique key code.
Features
• Authentication via encrypted and unencrypted NFC Tags or
NFC enabled smartphones or key code
• Supports permanent, disposable or time-limited key codes
• Universal button
• Alarm-authentication
Installation
Install the mounting frame of the NFC Code Touch on the
desired installation place. Power up the device and pair it with
your Miniserver in Loxone Config. Alternatively you could power
up the device with the provided battery, but note that due to
higher need of power the authentication with NFC and the
background light will not work. To finish the installation attach
the NFC Code Touch as shown on the mounting frame.
For additional information, declaration of confirmity,
visit www.loxone.com/help/nfc_code_touch
Important Information
• Due to the higher power demand, the NFC-Reader and
background lighting will only work when the device is
externally powered with SELV/PELV
• For security reasons, we strongly suggest you only use
encrypted NFC tags for access control from Loxone.
• If the NFC Code Touch is being powered by battery, please
note the keypad must be woken up with the check mark
prior to entering the key code.
24V
GND
Universal
Button
Attach here
NFC Sensor
