About the product
The Miniserver Go is a device for the automatic control and
management of home automation and similar non safety
critical applications. The Loxone Miniserver Go has a fully
integrated Air Base Extension and is perfect for retrofitting
Loxone in existing homes.
Installation & electrical connection
Connect device only to the power supply that is shipped with
the product. Do not connect the device to telecommunication
networks.
If the unit is used in a non conform manner as specified by
the manufacturer the product included safeguards will be
impaired.
For additional information, declaration of confirmity,
visit www.loxone.com/help/miniserver-go
Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
GND
Status
LED
Micro
SD
LAN
Connector
Power via
Micro USB
Link
Specifications
Keep in mind that GND needs to be
connected to the ground of
the 24V Power.
EXT
Link + Link –
Miniserver Go
GND
Link
+
24V
GND
24VDC
Power Supply
N L
120˜ t ermination
resistor
Connect Extension
This folder is a part of the product!
Connection
Push-In-Technology
To make connection, insert
wire; to remove the wire,
twist and pull at the same
time
Wire Diameter
0.2...1.5mm² /
AWG24...AWG16
Exposed Wire Length
8mm / 0.31”
