background image

7

 MEM (Memory)

The 

MEM

 key may be used to initiate a Memory Scan and gives you the

option of adding or deleting channels from the radio's scan list memory.

CALL

By pressing the 

CALL

 key you can make a new call, return the last in-

coming call, place a call to all ships or to one of up to 10 stored MMSI
numbers from a saved directory.

DISTRESS

By lifting up the red cover and holding down the 

DISTRESS

 button for

three seconds, you will send a distress call to the Coast Guard and any
other ship within range of you.

Arrow Keys

Use the 

 

 keys to scroll through the channels and various menu op-

tions.

PTT (Press to Talk)

The 

PTT

 key is the talk button on the microphone. Press and hold it

down to talk when making or receiving a call.

DSC Calling vs. non-DSC Calling

The LVR-850 supports two types of calls, Digital Selective Calls (DSC)
and non-Digital Selective Calls. A non-DSC call is the traditional
method where an individual hails another vessel on Ch. 16, then asks
the other party to switch to a working channel set aside for the desired
communication type. Once they have left Ch. 16 and the selected
working channel is clear, the individual hails the vessel again to initi-
ate communication.

What is a DSC call?

A relatively new technology, digital selective calling (DSC) gives you
the capability to dial another boat directly via the vessel's MMSI (Mari-
time Mobile Service Identity) number, which functions much like a
phone number. Digital Selective Calling simplifies the calling process,
because you don't have to hail the vessel on Ch. 16 nor do you have to
verbally direct them to the working channel you want them to switch to
for communication. When their DSC radio receives your call, it auto-
matically will switch to the channel you selected for communication.

The primary reason DSC was created was to enhance boater safety. It
does this in several ways. When working in tandem with a GPS unit, it
helps the Coast Guard respond more quickly to a Distress Call, since
the location of the vessel in distress will be automatically transmitted
when the signal is sent out. It will automatically repeat a distress sig-
nal every four minutes. That would come in handy if, as in the case of a

Summary of Contents for LVR-850









































Reviews: