Lowrance Link-8 User Manual Download Page 59

Page: 59 / 87

You now have the following options: RESEND, PAUSE, CANCEL:

To RESEND the call, press

RESEND

soft key (AIS/IC key) to enter "HOLD DISTRESS 3

SECONDS TO SEND" screen. Hold down DISTRESS key for 3s to resend the call or press

EXIT

soft key (AIS/IC key) to return to waiting for an acknowledgement call.

To PAUSE the call, press

PAUSE

soft key (WX/NAV key) to pause the "Call repeat" mode,

press

EXIT

soft key (AIS/IC key) to resume the same call.

To CANCEL the call, press

CANCEL

soft key (GO/MOB key) to enter "DISTRESS CALL

SEND CANCEL" screen.

•

Press

soft key (WX/NAV key) to return to waiting for an acknowledgement call.

•

Press

YES

soft key (AIS/IC key) to send the DISTRESS CANCEL call. Then press PTT to report

your situation using the handset mic, after the report, press EXIT to return to the normal

operating mode.

After receiving the acknowledgment, press

SILENC

soft key (AIS/IC key) then reply

using the microphone, or press EXIT key to quit the current distress acknowledgment.

Note:

Prior to receiving an acknowledgement, the distress alert call cannot immediately be

terminated by you, it can only be cancelled by completing the distress call cancel process as
described above (step 8).

8-2 Receiving a Distress Call (DISTRESS!)

DISTRESS

UNDEFINED

123456789

50.123

▼

00:01

An alert sounds when a distress call (DISTRESS!) is received.
1.

Press

SILENC

soft key (AIS/IC key) to silence the alert. You do not need to send an

acknowledgement.

The radio automatically selects CH16 after 10 seconds if no user intervention, or press

ACCEPT

soft-key (AIS/IC key) to change to CH16 immediately.

Press +/- button or rotate the CH knob to view details of the distress call. Details

include the user MMSI and nature of the emergency (if specified), also the time and the

location (if specified). If the location and time are not specified, these are replaced with

sequences of 9s and 8s respectively.

•

The radio is capable of receiving enhanced LL position data if the vessel transmitting the

distress call is sending this. This provides the position of the distressed vessel to within

20 m (60 ft).

Press PTT to establish voice contact or press EXIT key to quit the DISTRESS RECEIVE call.

Note:

The call data is stored in the Distress Log and location data (DSC & DSE) sentence will

be output on the NMEA0183 port for indication on a connected chart-plotter / MFD.

Lowrance - Link-8 Operation Instructions

Summary of Contents for Link-8
























































































Search results

Summary of Contents for Link-8

Reviews:

Related manuals for Link-8

Brands by name

Popular brands

Lowrance Link-8, User Manual

Search results

Summary of Contents for Link-8

Reviews:

Related manuals for Link-8

Brands by name

Popular brands