Lowrance Link-6 User Manual Download Page 17 | Manualshive

Page: 17 / 58

background image

| 17

The radio menus |

Link-6 operator manual

Display

This menu allows the user to partially customize the screen
information displayed, and adjust the screen for best visibility to suit
the user and operating conditions.

Time display

Select to switch the display of Time to ON or OFF.
If turned ON, the display of COG/SOG is turned off, due to screen
space constraints.
LOC (Local Time) is displayed below the time if a UTC (Coordinated
Universal Time) offset has been entered; otherwise UTC is shown in
it’s place if no offset has been applied.

POS display

Select to switch ON or OFF the display of position provided from
connected GPS.

COG/SOG

Select to switch ON or OFF the display of COG/SOG provided from
connected GPS.

If turned ON, Time display is turned OFF, due to screen space
constraints.

Backlight

Select to make adjustment to the backlight level using the Channel
knob. Range is OFF, then 1 to 10.
Press MENU SELECT button to activate night mode (inverts display).

Contrast

Select to make adjustment of the screens contrast, using the
Channel knob. Range is 00 to 10.

Radio setup

The Radio setup menu covers settings that are typically configured
at installation, and seldom need changing.

Local/Dist

Use LOCAL/DIST to improve the sensitivity of the receiver either
locally (LOCAL) or over distances (DIST).
LOCAL is not recommended for use in open sea conditions. It is

«
...
15
16
17
18
19
...
»

Summary of Contents for Link-6



























































Reviews:

No comments

Related manuals for Link-6

Brand: Kambrook Pages: 2

Brand: S&C Pages: 8

Brand: S&C Pages: 52

Brand: S&C Pages: 16

Brand: Audiovox Pages: 16

Brand: Pure Digital Pages: 18

Brand: Marine Pages: 5

NS-CL01 - AM/FM Dual Alarm Clock Radio

Brand: Insignia Pages: 68

Brand: RoadCom Pages: 11

Brand: Directechs Pages: 3

Brand: La Crosse Technology Pages: 10

Brand: jWIN Pages: 3

Brand: König Electronic Pages: 8

Brand: Sangean Pages: 9

Brand: Sangean Pages: 1

Brand: Lowrance Pages: 87

Brand: Cobra Pages: 21

MC522BC LCD Microphone

Brand: GME Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands