Lowrance Link-5 User Manual Download Page 28

Page: 28 / 68

Lowrance | Link-5 VHF User Guide

4-9 DSC Test Reply (TEST REPLY)

You can respond to incoming DSC TEST calls with an automatic response or with a manual
response.

MANUAL

manual responce is required, press ENT to confirm or press EXIT to cancel.

AUTO

automatically replies after a 10 second delay with an ACK to any incoming
DSC TEST call.

DSC SETUP
LL REPLY

▲

AUTO SWITCH

►

TEST REPLY

▼

TEST REPLY

►

MANUAL

AUTO

4-10 Set the inactivity timer (TIMEOUT)

You can set the inactivity timer with the following options:

AUTOMATED

you can set the inactivity timer to automatically timeout after a period of

inactivity for the following two categories: NON-DISTRESS or DISTRESS
Timeout options are:
DISTRESS:

NO TIMEOUT; 5 MINS; 10 MINS (default is NO TIMEOUT)

NON-DISTR:

NO TIMEOUT; 10 MINS; 15 MINS (default is 15 MINS)

NON AUTO

you can set the inactivity timer to exit any non-automated procedure
activity. Timeout options are:

NO TIMEOUT; 10 MINS; 15 MINS (default is 10 MINS)

Note:

If NO TIMEOUT is selected, then you must press the EXIT key to exit the procedure.

Example:

to set a 10 minute TIMEOUT for non-automated functions:

Select TIMEOUT, then select NON AUTO

Select desired timeout period: NO TIMEOUT, 10 MINS or 15 MINS

NON AUTO

NO TIMEOUT

►

10 MINS

15 MINS

TIMEOUT

AUTOMATED

►

NON AUTO

DSC SETUP
AUTO SWITC

▲

TEST REPLY

►

TIMEOUT

In this example, 10 MINS has been selected, meaning the radio will exit any non-automated
procedure after a period of 10 minutes of non-activity.

Draft

- Final

approval

Summary of Contents for Link-5





































































Search results

Summary of Contents for Link-5

Reviews:

Related manuals for Link-5

Brands by name

Popular brands

Lowrance Link-5, User Manual

Search results

Summary of Contents for Link-5

Reviews:

Related manuals for Link-5

Brands by name

Popular brands