Lowrance HDS Gen3 Polaris Operator'S Manual Download Page 61

Page: 61 / 96

Lowrance weather module is connected to SAT IN. Other auxiliary
audio sources only have volume control.

Detaching Sirius from the AUX source

If a Sirius radio is connected to the FUSION radio/server, the AUX
source is automatically attached to the Sirius feed.

Sirius

then

appears in the source list when the FUSION server is active.
To use the AUX source for a different device, the Sirius must be
detached from the AUX source.

Note:

To use SiriusXM, an optional SiriusXM tuner must be

connected to the FUSION server.

Radio

Selecting tuner region

Before playing FM or AM radio, and using a VHF radio, you must
select the appropriate region for your location.

Audio

| HDS Gen3 Polaris Operator Manual

Summary of Contents for HDS Gen3 Polaris

































































































Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands

Lowrance HDS Gen3 Polaris, Operator'S Manual

Search results

Summary of Contents for HDS Gen3 Polaris

Reviews:

Related manuals for HDS Gen3 Polaris

Brands by name

Popular brands