To Navigate to a Point of Interest on the Chart page:
From the Chart page center the
1.
cursor over a point of interest,
press the
Go to Cursor
softkey.
The unit will create a straight line
navigation course to the cursor
position on the Chart page.
To stop Navigating to a Point of Interest
or any other destination:
From the Chart page, press the
1.
Cancel navigation
softkey.
Go To Cursor / Cancel Navigation
To Create Waypoint at current position:
Press the
1.
WPT/Find
key to create a waypoint at the your current
position.
To Create Waypoint at the Cursor position on Chart page:
Place the cursor on the Chart
1.
page where you want to set
the waypoint, press the
New
Waypoint
softkey. The New
Waypoint menu will appear.
Select
2.
Save
from the New
Waypoint menu.
MMC / SD card slot
Waypoints
The MMC card slot door has a magnetic latch. Al-
ways use care when inserting MMC cards. Forcing
cards into the slot could cause damage. Make sure
the MMC card slot door is always closed to help
prevent moisture from getting into the card slot
compartment. The right hand card slot features a
higher speed connection and should be used first.
The right hand card slot is MMC+ card compatible
offering a higher speed connection for faster data
transfer.
