Mounting
1
2
3
4
B
1
2
C
A
4
3
D
E
Remove the existing nose cone transducer
In the example below, an HDI nose cone transducer is illustrated. The same
disassembly principles apply for other nose cones, whether they have a built-in
transducer or not.
Install the 3-IN-1 Active Imaging nose cone transducer
Before installing the nose cone transducer, check that the O-rings (1x
A
, 2x
B
and
1x
C
) are properly installed.
Tools required
•
8 mm hex key
Nose cone bolt (
D
) torque: 7.5 Nm (5.5 ft-lbf)
Nose cone cap (
E
) torque: 3.5 Nm (2.5 ft-lbf)
Parts included
•
1x 3-IN-1 Active Imaging nose cone transducer
•
4x O-rings (1x O-ring (
A
), 2x O-ring (
B
), 1x O-ring (
C
))
