Lowrance Electronics GlobalMap 4800M Operation Instructions Manual Download Page 110

Page: 110 / 132

104

appear. Press

↓

↑

to the selected POI and press

ENT

to call up the

POI's Waypoint Information screen.

Find by Nearest option, left, Calculating screen, center, POI list, right.

Search by name of POI.

Press

ENT

. There are two options:

You

can

spell out

the POI in the top selection box. Press

↑

↓

to change

the first letter, then press

→

to move the cursor to the next letter and

repeat until the name is correct, then press

ENT

Jump down to

the lower selection list by pressing

ENT

, then press

↓

↑

to select a

POI from the list, then press

ENT

to call up the POI's Waypoint Infor-

mation screen.

Find by Name option, left, Find by Name menu, right.

4. When the POI's Waypoint Information screen is displayed, you can
choose to "Go To" the POI waypoint by pressing

ENT

or find it on the

map by pressing

→

ENT

www.Busse-Yachtshop.de email: [email protected]

Summary of Contents for GlobalMap 4800M




































































































































Search results

Summary of Contents for GlobalMap 4800M

Reviews:

Lowrance Electronics GlobalMap 4800M, Operation Instructions Manual, Page: 110 / 132

Search results

Summary of Contents for GlobalMap 4800M

Reviews: